◆ Wide Test Frequency 10Hz ~ 30MHz/20MHz/10MHz/5MHz

◆ 7” LCD color Display

◆ 0.08% Basic Accuracy

◆ Displaying Four Measurement results simultaneously from 17 selectable measurement parameters freely

◆ 15 steps List Measurement

◆ Two Curves Sweep Mode

◆ Internal DC Bias Voltage ±12V

◆ USB Storage available

◆ ALC function available

◆ Standard Interfaces : RS-232C, USB host/device, LAN, GPIB and Handler

◆ Universal power input

GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200, which has four models and the maximum test frequency is up to 30MHz. The entire series adopts 7-inch color display and features a high measurement accuracy (0.08%). The measurement results can be presented numerically or graphically according to the selected measurement mode, allowing users to optimally interpret the characteristics of the DUT. At the same time, a full range of standard interfaces such as USB device / RS-232C / Handler and GPIB allow users to control the instrument by the most familiar interface without worrying about additional hardware investment costs. Furthermore, the series also provides USB storage function when operating in the graphics mode. The measured characteristic curves and values of the DUT are saved for subsequent analysis. The wide variety of features of the LCR-8200 can help users easily respond to the test requirements of passive components in R&D, engineering, and production.

Under the numerical measurement mode, it is divided into MEAS measurement and LIST measurement. Under the MEAS measurement mode, users can select up to 4 (at least 1) desired measurement items from the 17 measurement parameters. Each selected measurement item can be set to compare (PASS/FAIL judgement) or to the BIN function to conduct judgement and sorting, so that users can easily learn the results of the measurement by color and sound. Under the LIST mode, users is allowed to set 15 test points and each test point can set parameters independently, including frequency/voltage/bias, and it even can set independent comparison function and numerical display mode (value, difference value, difference percentage). On top of that, under the LIST mode, the automatic trigger mode is also provided. After each LIST measurement is completed, the instrument will be in the mechanism of standby trigger. Users only need to place the next DUT, and the LIST test can be automatically performed that saves time of repeatedly

pressing the trigger button.

Under the graphical measurement mode, the SWEEP measurement provides the ability to sweep two parameters simultaneously (TRACE A / TRACE B). The relative parameters of the sweep, including the sweep source (frequency, voltage or current), horizontal / vertical axis scale (LINEAR / LOG), speed...etc., even adding a bias, can be set and tested according to the actual needs of users. After the sweep is completed, the scale can be automatically adjusted according to the selected TRACE, so that the whole observation is clearer and easier to read. Other than that, the swept graphics (bmp) and values (csv) can be saved to the flash drive for subsequent

analysis and applications.

Whether it is for measurement data collection during the test process or the collocation for the system integration, the LCR-8200 series offers the most comprehensive communications interfaces, including USB device, RS-232C, LAN for PC connection and even GPIB, which are all standard communications interfaces. Users can choose according to the habits of use and the convenience of the system architecture without any additional cost. In addition, the LCR-8200 series also provides a Handler interface for system integration of PLCs or sorters.

◆ 안전 지침서 x 1

◆ 전원 코드 x 1

◆ 테스트 픽스쳐 LCR-06B x 1

◆ CD(사용 설명서) x 1

추가 구매 가능 액세사리

◆ LCR-05 Axial & Radial 리드 테스트픽스쳐 (DC~1MHz, ±35V) 

◆ LCR-06B 켈빈 클립(4선) 테스트 리드 (DC~1MHz,±35V) 

◆ LCR-07 악어 클립(2선) 테스트 리드 (DC~1MHz,±35V)  

◆ LCR-08 SMD 칩 테스트 트위져 (DC~1MHz,±35V) 

◆ LCR-12 켈빈 클립(4선) 테스트 리드

◆ LCR-15 SMD 칩(0201~1812) 테스트 픽스쳐(DC~1MHz, ±35V)

◆ GTL-232 RS-232 케이블, 9핀(암)-9핀, 널 모뎀, 약 2000mm

◆ GTL-248 GPIB 케이블, 약 2000mm