◆ Operating voltage (DC)：PEL-3000H (1.5V~150V), PEL-3000H (5V~800V)

 ◆ Operating Mode : C.C / C.V / C.R / C.P / CC+CV / CR+CV / CP+CV

 ◆ Parallel Connection of Inputs for Higher Capacity (Max : 9,450W)

 ◆ Support of High Slew Rate：Max 16A/us

 ◆ Run Program Function（GO/NO GO Test）

 ◆ Sequence Function for High Efficient Load Simulations

 ◆ Commands are compatible with Kikusui PLZ-4W model.

 ◆ Dynamic(Switching) Function：0.0166Hz ~20kHz

 ◆ Soft Start Function：Off / On(1~200ms, Res：1ms)

 ◆ Adjustable OCP / OVP / OPP / UVP Setting

 ◆ Short Circuit Function

 ◆ Timer function : Elapsed Time of load on

 ◆ Cut Off Time(Auto Load Off Timer )：1s to 999h 59min 59s or Off

 ◆ External Channel Control / Monitoring via Analog Control Connector

 ◆ Setup Memories：100 sets

 ◆ 3.5 Inch TFT LCD Display

 ◆ Multi Interface : USB 2.0 Device / Host , RS-232 , GPIB (Optional)

The PEL-3000 series, a single-channel, programmable D.C. electronic load with 0.01mA current resolution and 16A/μs current Slew Rate, is very ideal for testing server power supply and SPS (Switching Power Supply) for commercial and industrial computers. For a heavy-duty device like cloud ecosystem running 24-hour nonstop operations, a stable and high-power power supply, ranging from 175W to 1050W, is required to maintain the normal operation of server, Hub, and the equipment of data storage and internet communications. Owing to the increasing demand of data transmission and large scale data storage of telecommunications systems, the infrastructure of internet communications is in the pace of rapid expansion. This has greatly boosted the market demand of telecommunications equipment powered by power supply of 2000W and above. The flexible power combination of PEL-3000 meets the test requirements of present high-power power supply.

The PEL-3000H programmable DC Electronic load, which not only inherited functions and features from the PEL-3000 series but providing three current ranges for all PEL-3000H series and adding voltage monitor BNC terminals on the front panel. The PEL-3000H series, a single-channel, programmable D.C. electronic load with 800V and 0.84A/μs current Slew Rate, is ideal for the test of the high voltage devices such as the EV & HEV in-vehicle chargers, DC/DC converters or high-voltage batteries.

 ◆ 사용 설명서 x 1

 ◆ 전원 코드 x 1

 ◆ 보호 덮개 x 1

 ◆ 절연시트 x 1

 ◆ 프레임 링크 케이블 GTL-255(PEL-3211)

기본옵션

 ◆ R-CON PEL-3000 제어 소프트웨어 (30일 무료 사용) 

추가 구매 가능 구성품

 ◆ GTL-120 테스트 리드,최대 40A

 ◆ GTL-248 GPIB 케이블, 이중 차폐,2000mm

 ◆ GTL-246 USB 케이블, USB 2.0, A-B 타입, 4P

 ◆ GTL-251 USB-GPIB 어댑터, GPIB-USB-HS,2000mm

 ◆ GTL-255 프레임 링크 케이블, 300mm

 ◆ GRA-414-J 랙 마운트 키트(JIS) PEL-3021/3041/3111

 ◆ GRA-414-E 랙 마운트 키트(EIA) PEL-3021/3041/3111

 ◆ PEL-004 GPIB 카드

 ◆ PEL-010 먼지 필터