상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?
◆ 4.3인치 TFT LCD 디스플레이
◆ 88mm(2U) 케이스 높이 설계
◆ 출력 용량 : APS-7050(500VA), APS-7100 (1000VA)
◆ 임의파형 출력 기능
◆ 인공적인 Surge/Dip 전압 출력
◆ 전압, 전류, 전력, 피상전력, 전류(피크), IPKH, 주파수, 역률, 파고율 측정 기능
◆ 10 세트 시퀀스 모드, 시뮬레이션 모드, 프로그래밍 모드
◆ 10세트 프리셋 저장/호출 기능
◆ SCPI 에뮬레이션, LabView 드라이버 지원
◆ USB(호스트), LAN, GPIB(옵션), RS-232/USB CDC(옵션) 인터페이스
◆ SYNC 출력, 프로그램 모드 신호 출력, 트리거 IN/OUT, 출력 ON/OFF
<GW Instek APS-7000 AC Power Source - Simulate Mode Introduction>
<GW Instek APS-7000 AC Power Source - Sequence Function>
<GW Instek APS-7000 AC Power Source - Program Mode Function Introduction>
<GW Instek APS-7000 AC Power Source - Arbitrary Function Editing>
APS-7000 is a series of programmable linear AC power supply, with the height of 2U and output frequency range is 45~500Hz, , the maximum rated output for APS-7050 is 500VA, 310Vrms, 4.2Arms and APS-7100 is 1000VA, 310Vrms, 8.4Arms. The optional collocation can be extended to the maximum output voltage of 600Vrms and maximum output frequency of 999.9Hz. The APS-7000 series comprises nine measurement and test functions (Vrms, Irms, F, Ipk, W, VA, PF, Ipk hold, CF), and provides user interface similar to that of AC Power Meter. The APS-7000 series, via switching many sets of current levels to increase small current measurement resolution, is ideal for the LED industry and standby mode power consumption test. To meet the test criteria of line voltage fluctuation often seen in consumer electronics, APS-7000 series not only supply a stable source of AC, they also features five methods to cope with special purpose or abnormal voltage, frequency, and phase; ten sets of the Simulate mode simulate power outage, voltage increase, and voltage drop; ten sets of the Sequence mode allow users to define parameters and produce sine wave by editing steps; ten sets of the Program mode can edit AC waveform output and define the ceiling and floor level of measurement items for different DUT; Ramp Control allows users to set the variation speed for output voltage rise and fall; Surge/Dip Control simulates DUT’s input power producing a Surge or Dip voltage overlapping with output voltage waveform at a specific time.
The series is ideal for user to produce high complicated waveform and transient waveform to verify electronic product operation under adverse condition.
APS-7000 series currently involves APS-7050 & APS-7100 as below:
◆ CD ROM (User Manual, Programming Manual) x 1
◆ Power Cord x 1
◆ Main terminal cover set
◆ Test Leads : 1 x red, 1 x black
추가 구매 가능 구성품
◆ APS-001 GPIB interface card
◆ APS-002 RS-232 / USB interface card
◆ APS-003 Output Voltage Capacity (0~600Vrms)
◆ APS-004 Output Frequency Capacity (45~999.9Hz)
◆ GRA-423 APS-7000 rack mount kit
◆ GRA-429 APS-7200 rack mount kit
◆ GRA-430 APS-7300 rack mount kit
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?