◆ Voltage output : 6V / 12.5V / 20V / 40V / 60V/ 100V/ 150V/ 300V/ 400V/ 600V

◆ Power output：1200W ~ 1560W

◆ C.V/ C.C priority mode

◆ Adjustable voltage/current rise and fall time

◆ 1U height and 19”Rack Mount Size

◆ Bleeder Control function

◆ Internal Resistance function

◆ Protection: OVP, OCP, OHP,UVL, AC Fail, FAN Fail

◆ Standard: USB, LAN, RS-232, RS-485, analog control

◆ Option: GPIB, isolated analog interface (voltage control/ current control)

GW Instek PSU-HV series has five models, including PSU 100-15, PSU 150-10, PSU 300-5, PSU 400-3.8, and PSU 600-2.6. The launch of PSU-HV is to complete the existing PSU series so as to satisfy high voltage application demands, allowing the augmented PSU series to cover a voltage range from 6V to 600V. PSU-HV inherits the functional design and maintains the high power density characteristic and 1U height appearance of the PSU-LV series (PSU 6-200, PSU 12.5-120,PSU 20-76, PSU 40-38和PSU 60-25). Furthermore, the original maximum output voltage of 60V is expanded to the maximum voltage of 600V and the maximum power of 1560 watts. The launch of the PSU-HV series augments the existing PSU series to fully satisfy the extensive voltage demands of 1U power supply market and provides system integrators with more flexibilities and selections to conduct system integration. The introduction of the PSU-HV series has perfected the PSU product line, which satisfies the applicationrequirements ranging from low voltage and large current to high voltage.

Utilizing same model units of the PSU series to conduct series and parallel connections can increase total output power, total current or total voltage. The wide voltage and current output ranges of the PSU series can fully satisfy various voltage and current measurement requirements. The PSU series is a single power output DC programmable power supply, which outputs 1200W to 1560W. The PSU series provides maximum 2 units in series connection (models under300V) to achieve maximum 600V or 4 units in parallel connection to obtain maximum800Aand the maximum output power of 6.24 kilowatts.

The PSU series allows settings for CC priority or CV priority. Under CC or CV mode, users can adjust slew rate for output voltage or current based upon test requirements. There are two kinds of slew rate settings: high speed priority and slew rate priority.  High speed priority sets slew rate at the maximum speed to reach CC or CV mode. Slew rate priority allows users to set slew rate for CC or CV mode in order to control rise or fall slew rate.Slew rate priority mode is ideal for motor tests by adjusting the rise time of output voltage to protect DUT from being damaged by inrush current occurred at turn-on.

Comparing with other 1U power supplies available in the market, PSU supports a most complete array of interfaces, including USB, LAN, RS-232, RS-485, analog control interface, GPIB (option), isolated analog interface (voltage control), and isolated analog interface (current control). Via the multi-drop mode, PSU will not need any switch/hub and GPIB cable for remote control and slave unit augmentation when using LAN, USB or GPIB. This feature can helpusers save costs on augmentation equipment for connecting slave while using LAN or USB.

The new PSU-HV series is ideal for the primary input of DC/DC converter and servomotor production application. PSU is often integrated into component test systems such as aging test equipment for capacitors; 600V DC bias applications; aging test equipment for diode; semiconductor production equipment; automotive electronics; and ECU for V8 engine or V12 engine, etc.

The PSU series provides users with flexible settings of High/Low Level or  Trigger input /Trigger output signals with pulse width of 1 ~ 60ms. Trigger input controls PSU to output or upload preset voltage, current and memory parameters. While outputting or uploading preset voltage, current and memory parameters PSU can produce corresponding Trigger output signals.

  ◆ User Manual x 1
  ◆ Basic Accessories Kit x 1

추가 구매 가능 구성품 

  ◆ PSU-01A 2U Size Handle x 2, Plates x 2 

  ◆ PSU-01B 병렬 연결용 버스 바 (2대 연결)

  ◆ PSU-01C 병렬 연결용 케이블 (2대 연결)

  ◆ PSU-02A 3U Size Handle x 2, Plates x 2 

  ◆ PSU-02B 병렬 연결용 버스 바 (3대 연결)

  ◆ PSU-02C 병렬 연결용 케이블 (3대 연결)

  ◆ PSU-03A 4U Size Handle x 2, Plates x 2 

  ◆ PSU-03B 병렬 연결용 버스 바 (4대 연결)

  ◆ PSU-03C 병렬 연결용 케이블 (4대 연결)

  ◆ PSU-232 RS-232 케이블 (DB9 커네턱 키트 포함)

  ◆ PSU-485 RS-485 케이블 (DB9 커네턱 키트 포함)

  ◆ GRM-001 슬라이드 브라켓 2pcs/set

  ◆ PSU-GPIB GPIB I/F 카드 (공장 출하 옵션)

  ◆ PSU-ISO-I Isolate Current 원격 제어 카드 (공장 출하 옵션)

  ◆ PSU-ISO-V Isolate Voltage 원격 제어 카드 (공장 출하 옵션)

  ◆ GPW-001 UL/CSA 전원 코드, 3000mm

  ◆ GPW-002 VDE 전원 코드, 3000mm

  ◆ GPW-003 PSE 전원 코드, 3000mm

  ◆ C-02 USB 메모리 데이터 로깅 옵션(SW 언락)

  ◆ LinkView 언락키 충방전 소프트웨어 언락키 (로그저장 언락)

모델별 사양 

  ◆ PSU 150-10 19", 1U, 1CH, 150V/10A/1.5kW, LAN/RS-232&RS-485/USB/Analog IF/GPIB(옵션), 단상 170-265AC 입력

  ◆ PSU 150-20B 19", 2U, 1CH, 150V/20A/3kW, LAN/RS-232&RS-485/USB/Analog IF/GPIB(옵션), 단상 170-265AC 입력

  ◆ PSU 150-30B 19", 3U, 1CH, 150V/30A/4.5kW, LAN/RS-232&RS-485/USB/Analog IF/GPIB(옵션), 단상 170-265AC 입력

  ◆ PSU 150-30C 19", 3U, 1CH, 150V/30A/4.5kW, LAN/RS-232&RS-485/USB/Analog IF/GPIB(옵션), 3상 180-253AC 입력

  ◆ PSU 150-30D 19", 3U, 1CH, 150V/30A/4.5kW, LAN/RS-232&RS-485/USB/Analog IF/GPIB(옵션), 3상 360-440VAC 입력

  ◆ PSU 150-45B 19", 4U, 1CH, 150V/450A/6kW, LAN/RS-232&RS-485/USB/Analog IF/GPIB(옵션), 단상 170-265AC 입력

  ◆ PSU 150-45C 19", 4U, 1CH, 150V/450A/6kW, LAN/RS-232&RS-485/USB/Analog IF/GPIB(옵션), 3상 180-253AC 입력

  ◆ PSU 150-45D 19", 4U, 1CH, 150V/450A/6kW, LAN/RS-232&RS-485/USB/Analog IF/GPIB(옵션), 3상 360-440VAC 입력